Looks like the baseline options in this brochure.
CPU
Pentium 4 1.7Ghz
x86 Family 15 Model 2 Stepping 9 GenuineIntel ~1699Mhz
Options
Installed Software
MX847000A - Platform Software (base)
MX847010A - W-CDMA/GSM Simulation Kit, w/ sub-codes:
MX847011A - W-CDMA Ciphering Software
MX847015A - Energy Management Test Simulator, Parallel Phone Test Software for ETS
MX847016A - Multi-cell Network Simulator
Installed Hardware
MU847010B - W-CDMA/HSPA Signalling Unit (x2)
MU847020B - GSM Signalling Unit (x2)
Operating System
Windows XP Pro, version 2002, SP2, build 2600
Drives
- Fujitsu MHW2040AT
- 40GB 2.5in PATA
- Even though label says 40GB, size being reported is 30GB.
- HAGIWARA SYS-COM NCF10-128BI
- 128MB CF Card
Controllers
Three IDE controllers
- Primary IDE Channel
- Secondary IDE Channel
- Intel 82801BA Ultra ATA Storage Controller - 244B
Texas Instruments PCI-1520 CardBus (2x)
Intel 8255xER PCI Ethernet
Intel PRO/100 Ethernet
Sierra Wireless AirCard HSDPA Modem (?)
Other
CF Card
The 128MB CF Card (HAGIWARA SYS-COM NCF10-128BI) is used to store the calibration information for whatever cards are installed. It’s hidden from Windows Explorer but can be opened by going to S:\ directly. Here are my files:
Licenses
They are tied uniquely to the computer and the cards, and so probably to the hard drive too. If you use “Recovery Kit” to restore the machine to factory setting, you licenses will be lost! You MUST back them up first!